LAMINATED GLASS CUTTING LINE
Laminated glass cutting line is a semi-automatic machine for cutting laminated glass sheets. The cutting table can also equipped with a Low-E edge deletion system, which removes soft coatings glass (Low-E) from glass sheets easily with maximum quality.
Choose Your Model
We have many different sizes of models. Choose the most suitable model according to your needs.
|Minimum glass size||350 mm||350 mm|
|Maximum glass size||3800 mm||4600 mm|
|Minimum glass thickness||3+PVB+3||3+PVB+3|
|Maximum glass thickness||8+PVB+8||8+PVB+8|
|Maximum glass cutting speed||20 m/min||20 m/min|
|W||3750 mm||6300 mm|
|L||7000 mm||8500 mm|
|H||3000 mm||3900 mm|
|W1||5350 mm||6200 mm|
|L1||2750 mm||3500 mm|
|L2||3850 mm||4850 mm|
Configure Your Line
Configure your line and factory area according to your needs and preferences with CMS Glass Machinery. LCKM Series has a long-lasting structure and stable design to help you minimize your operating cost.
Tilting Glass Loading Table
Tilting glass loading table (LYM) is designed for loading/unloading the glass sheets to the cutting table.
Laminated Glass Cutting Table
Laminated glass cutting table (LK) is a semi-automatic machine for cutting laminated glass sheets.
Brush Low-E Edge Deletion
With this solution (Ops.GKM.BED) our laminated glass cutting machines can do edge deletion and removal of low-emissivity film via a motorised metal brush from glass edges.
The glass sheet is loaded through loading table which has tilting feature. After the glass sheet is loaded, the operator moves the glass sheet to the cutting bridge manually by aid of air cushion system. Positioning and aligning the sheet to the cutting table is performed by entering the dimension of the glass. After the dimension is given, the machine will automatically position the glass for cutting. Afterwards, by the command of the operator the machine starts cutting process. Stop rollers are built in the table top of the downstream air cushion or breaking table. Two jointly driven cutting heads place the cut on the upper and lower surfaces of a laminated glass sheet simultaneously. Following cutting the heating resistances come up and heat the PVB material. After enough time of heating, the upper and lower cutting lines are broken open with a separate breaking roller system respectively.
- Automatic glass cutting system for laminated glass
- Fast, accurate and stable cutting performance
- Excellent cut quality with minimum tolerances
- Extremely robust structural design